- 24/7 Emergency Response
Commercial · Institutional · Government
Cleared 🡢 Rebuilt 🡢 Reopened.
1
Environmental work and selective demolition, documented and cleared.
Define the rebuild against the damage and file the work.
3
Structure, drywall, ceilings, flooring and finishes, with licensed trades coordinated.
4
Inspections, sign-offs and a documentation package for your carrier and your file.
Commercial reconstruction is the rebuilding of a commercial, institutional or government property after fire, water or flood damage, mold, storm damage, or demolition and environmental cleanup has left it damaged or stripped back, until it is permitted, inspected and ready to reopen. It goes beyond cleanup: it replaces what was removed, restores the finishes and systems, and closes the project out with sign-offs.
After the fire department and the carrier are done, the building still needs structural repair, new ceilings and partitions, fire-rated assemblies and finishes. We secure the property, clear what must be cleared and rebuild.
A pipe failure, sprinkler discharge, roof leak or flood can take out drywall, insulation, flooring and millwork. Once the space is dried and, if needed, remediated, it has to be rebuilt to a finished, inspected condition.
Mold remediation, abatement and hazardous-material removal leave bare space. Nothing can be finished until the area is cleared, and then the whole finish package has to go back.
Gut renovations, conversions and lease-turnover restorations start with demolition and end with a rebuilt space. Planning both together keeps the schedule honest.
| Element | What it includes | How we handle it |
|---|---|---|
| Structure and envelope | Framing and wall repairs, openings, roof edges and weather-tightness | Scoped after demolition shows the real condition |
| Drywall, ceilings and insulation | Partitions, ceiling grids and tiles, insulation, fire-rated assemblies | Installed after clearance and inspection of rough-in |
| Flooring | Subfloor repair, resilient, tile, carpet and specialty floors | Sequenced after wet trades and before final finishes |
| Doors, windows and storefronts | Interior and exterior doors, glazing, storefront systems | Ordered early; long lead times flagged in writing |
| Finishes and millwork | Paint, wall coverings, trim, cabinetry and counters | Last coat on, after clearance and punch list |
| Building systems | Plumbing, electrical, fire protection and HVAC reconnected or replaced | Licensed trades, coordinated by CRE |
Typical scope, not an exhaustive list.
Every CRE rebuild follows the same six-step sequence. It is built around what the building, the permits and your reopening date require, not around what is quickest for us.
We make the property safe, document the damage with photos and measurements, and identify any regulated materials. If another firm already did the mitigation, send us its reports and we will start from them.
Asbestos, lead, hazardous materials and mold are removed under their own rules and cleared by independent monitors or assessors where required. Selective demolition takes out what is damaged and nothing more.
We write the rebuild scope against the real condition of the building, price it and set the schedule backward from your reopening date. Documentation is organized so your adjuster can follow it.
We support the filings your architect, engineer or expediter makes, order long-lead items such as storefronts and doors early, and book the licensed trades.
Framing, rough-in, inspections, drywall, ceilings, flooring and finishes are sequenced so trades do not wait on each other, with dust, noise and access controlled in occupied buildings.
We coordinate inspections and sign-offs, walk the punch list with you and deliver a closeout package: permits, clearance and monitor reports, waste records and photos.
| Role | Responsibility | Independent of CRE? |
|---|---|---|
| Owner, landlord or tenant | Decides scope and budget, signs the contract, owns the reopening date | — |
| Insurance carrier and adjuster | Decide coverage and review the documented scope and costs | YES |
| Architect, engineer or expediter | Drawings, filings and code review where the project requires them | YES |
| Independent assessor / project monitor | Clears mold or asbestos work before the rebuild starts | YES — REQUIRED |
| CRE | Cleanup, demolition, reconstruction, coordination of licensed trades, permits support and closeout package | — |
| Licensed trades | Plumbing, electrical and fire-protection work that New York requires licensed trades to perform | COORDINATED BY CRE |
| Building authority | Issues permits, inspects and signs off | REGULATOR |
| Where | Permits and sign-offs | Notes |
|---|---|---|
| New York City | NYC DOB permits, inspections and sign-offs; asbestos requirements must be satisfied first | LPC approval for landmarked exteriors |
| Long Island, Westchester | Town, village or municipal building department | Requirements vary by municipality |
| New Jersey | Local construction code official | Requirements vary by municipality |
| Connecticut | Municipal building official | Requirements vary by municipality |
| Pennsylvania | Municipal code official | Requirements vary by municipality |
One contractor takes the building from damaged to reopened: the cleanup, the demolition, the rebuild, the trades and the filings. You have one call to make, and we answer for the schedule.
We schedule backward from the date you need the space back and flag the items that could threaten it, such as permit lead times and long-lead materials, in writing.
Every project closes with a records package your lender, insurer or agency can audit: permits, clearance and monitor reports, waste records and photos.
NYS DOL Asbestos Handling License #[LICENSE NUMBER] · Fully bonded & insured · OSHA 40-Hour HAZWOPER-trained crews
Interior and selective demolition that takes out what is damaged and nothing more, planned together with the rebuild.
Survey coordination, DEP filings and licensed abatement ahead of the rebuild, with independent monitoring.
Remediation under an independent assessor's protocol, then clearance and rebuild.
PCBs, mercury, chemicals and drums characterized, removed and manifested before the rebuild.
Lead-painted surfaces and steel handled before new finishes go on.
Pathway planning across DEP, DOL and DOB so permits and filings never hold the rebuild.
A rebuild looks different across our service area. In Manhattan it usually means after-hours schedules, freight-elevator windows and strict building rules. In Brooklyn, Queens and the Bronx we rebuild lofts, warehouses, industrial buildings and storefront corridors, often after abatement and demolition.
On Staten Island, storm and flood recovery drives much of the work. Outside the five boroughs, permits come from the town, village or municipality rather than NYC DOB, and asbestos work follows NYS Department of Labor rules. We plan around the authority that governs your site.
Beyond the five boroughs
— Get a Quote
Call 24/7
(000) 000-0000
